12v motorized ball valve
CR05 on/off electric ball valve actuator with feedback OP01F
12v mini electric valves
automatic water shut off valve
motorized control valve
12v electric valve

3/4" DN20 UPVC Plastic, Motorized Ball Valve , 5 Wire Electrical Ball Valve ,with position indicator and manual override,DC5V ,DC9-24V

$52.00 $46.66 SAVE 10%
  • Material: UPVC body — suitable for wastewater & chemical media
  • Power behavior: 5 Wire (Can Be Uesd With Indicator Lights) — closes automatically on power loss; manual override lever included
  • Fit & speed: 3/4" · opens/closes in under 5 seconds
  • Protection: IP67 rated — dust-tight and protected against water jets

Voltage: 5V DC

5V DC
9-24V DC

Thread Type: NPT

NPT
BSPP
Add to Wishlist

Estimated Shipping Widget will be displayed here!

american expressapple paydiners clubdiscovergoogle payjcbmaestromasterpaypalvisa
WEEKLY BULK DEALS
Ends In: 0d 00h 00m 00s
BUY 4+ SAVE 3%
BUY 8+ SAVE 5%
BUY 18+ SAVE 8%
Get Bulk Order Discount Ask on WhatsApp
30-Day Hassle-Free Returns
1-Year Replacement Warranty
Expert Technical Support
Free shipping within the US for products shipped from our US warehouse. For other shipping policies, please click here.
We offer returns or exchanges for any issues reported within 30 business days of receiving your item. For our detailed return policy, please click here.
• 30-Day Hassle-Free Returns: Full confidence in every purchase. We accept returns within 30 days.
• 1-Year Replacement Warranty: We stand behind our quality. If any hardware failure occurs under normal use within one year, we provide a direct replacement rather than a repair.
• Expert Technical Support: Our engineering team provides lifetime technical guidance. Whether it's installation or troubleshooting, we are here to support your success.
If you have any questions, please contact us.

Product Introduction

Specifications

Model

FH-MO

Size

3/4"

Valve Material

UPVC

Wiring Type

5 Wire (Can Be Uesd With Indicator Lights)

Ball Seal

PTFE

Operating Time

3-5 Seconds

Max Power

5W

Max Torque

2.5NM

Max Medium Pressure

1.0 Mpa

Temp Range (Flow Medium)

0-100℃/32-212℉

Life Expectancy

80K times

Bore Type

Standard

Operating State

Normally Closed

Ambient Temp Range

-20-45℃/-4-113℉

Enclosure Rating

IP67

5 Wire (Can Be Uesd With Indicator Lights)

5 Wire & Signal Feedback—When the ball valve is fully open or closed, the actuator automatically cuts off power to prevent circuit overheating during prolonged operation. The control method employs reverse polarity wiring (black wire: negative terminal, red wire: positive terminal, white wire: common terminal, green wire: open position signal, yellow wire: closed position signal). The open/close position indicator lights illuminate.

Product Information

OP05 Wiring - 5 Wires，With Valve Position Feedback

1. There should be 2 power supply, one for electric ball valve actuator - red wire to positive pole,  black wire to negative pole; another one for customer’s position indication devices - the green wire outputting fully-open signal connects to one device, the yellow wire outputting fully-closed signal connects to another device, and the devices both should be connected to the positive pole of the power supply, and the white wire of the electric ball valve actuator connects to negative pole of the power supply, there conforms a closed circuit. The valve opens, the open position indication device receives the fully-open signal, will light up if lights are used as position indication devices.

2. Reverse polarity, the ball valve closes, the close position indication device receives the fully-closed signal, will light up if lights are used as position indication devices.

※ Once in position, there will be no power consumption for electric ball valve, nomial power consumption for position indication devices.

※ In case of power loss, valve will remain in its current state.

※ Voltage of power supply for option：5V DC/12V DC/24V DC

※  A DPDT switch is suggested for a simple set up.

Motorized Valve Override

Manual Override Function

Can be used when power off or emergency shutoff

Pull up the hand-wheel
Pull up the hand-wheel to
activate the manual function
Rotate the hand-wheel
Rotate the hand-wheel and
confirm the valve opening/closing
position of through the indicator
Press the hand-wheel to
switch back to electric mode

Need certification details for a specific standard? Contact us — we're happy to help.

FAQ:

1. What is the Waterproof Rating of this valve? +
The motor's housing is rated at IP67 for ingress protection. If permanently installed outdoors, it is recommended to place it under a shelter or in a protective box to prevent prolonged exposure to rain.
2. What is the difference between N.C. (Normally Closed) and N.O. (Normally Open) ? +
In a N.C. valve, it's closed without power and opens when energized. Conversely, in a N.O. valve, it's open without power and closes when energized, blocking fluid or gas flow.
3.What is the difference between Full Port and Standard Port? +
In a full port valve, the internal diameter of the valve is the same as the pipe it's connected to. In a standard port valve, the internal diameter of the valve is smaller than the pipe size.
4.Can this be used for Drinking Water? +
Only the stainless steel valve body is suitable for drinking water. Brass (contains lead) and UPVC valve bodies should not be used for drinking water.
5.For auto return valves, what is the minimum On-Time required for electrical storage to enable closing when power off? +
To ensure automatic reset functionality when the power is disconnected, it is essential to power the device for approximately one minute to charge the capacitor in 2-wire auto return motorized ball valves.