3/4" DN20 brass ,Motorized Ball Valve,OP03 3 wire 1 point control,DC5V ,DC9-35V, AC220V
- Material: Brass body — suitable for water & HVAC systems
- Power behavior: 3 Wire 1 Point Control — closes automatically on power loss; manual override lever included
- Fit & speed: 3/4" · opens/closes in under 5 seconds
- Protection: IP67 rated — dust-tight and protected against water jets
Estimated Shipping Widget will be displayed here!
Product Introduction
3 Wire 1 Point - Simplified wiring achieved through a three-wire, two-point configuration (black wire to common terminal, black wire to red + green wires for open, black wire to red wire for closed).
Durable & Long-Lasting–Built from high-quality brass for long-lasting reliability, movafaFH motorized ball valve withstands 80,000 - 100,000+ cycles, Features a North American standard adapter plug for both safety and convenience. perfect for automated water control systems
No Leak & Wide Applications - Adopt EPDM Rubber Gasket and float ball valve that superior sealing performance and good resistance to water, steam, alkalis, acids, and oxygen-containing solvents, Ideal for O2,O3, automated irrigation, and water filtration systems
NPT Threading & Full Port–Features 3/4" brass full port and NPT threading for fit connections, effectively reduces pressure loss, ensuring optimal flow dynamics and efficiency
Specifications
FH-S
3/4"
Brass
3 Wire 1 Point Control
PTFE
3-5 Seconds
5W
2.5NM
1.0 Mpa
0-100℃/32-212℉
80K times
Standard
Normally Closed
-20-45℃/-4-113℉
IP67
3 Wire (1 Point Control)
3 Wire 1 Point - Simplified wiring achieved through a three-wire, two-point configuration (black wire to common terminal, black wire to red + green wires for open, black wire to red wire for closed). Manual override functionality can be added to enable seamless switching between manual and electric modes without tools. In emergencies, a single-button switch ensures continuous operation
Wiring Guide
OP03 Wiring - 3 Wires, 1 Point Control
1. Connects red wire and green wire to positive pole, black wire to negative pole, the ball valve opens.
2. Disconnects green wire, the ball valve closes.
※ In case of power loss, valve will remain in its current state.
※ Voltage of power supply for option:5V DC/9-24V ADC
※ A on/off switch can be installed in line with green wire for a simple set up.
This OP03 electric ball actuator uses a constant power and ground wire while a third green wire is used for the control switch to open and close the valve.
※ Valve status feedback available for custom.
Need certification details for a specific standard? Contact us — we're happy to help.