1/4" DN8 Stainless Steel ,Motorized Ball Valve, and 2 Wire Reverse Polarity Setup,with position indicator and manual override,DC5V,DC9-24V
- Material: 304 Stainless Steel body — suitable for food-grade & potable water applications
- Power behavior: 2 Wire Reverse Polarity — closes automatically on power loss; manual override lever included
- Fit & speed: 1/4" · opens/closes in under 5 seconds
- Protection: IP67 rated — dust-tight and protected against water jets
Estimated Shipping Widget will be displayed here!
Product Introduction
Specifications
FH-MO
1/4"
304 Stainless Steel
2 Wire Reverse Polarity
PTFE
3-5 Seconds
5W
2.5NM
1.0 Mpa
0-100℃/32-212℉
80K times
Standard
Normally Closed
-20-45℃/-4-113℉
IP67
2 Wire Reverse Polarity
2 Wire Reverse Polarity - When the ball valve is fully open or closed, the actuator automatically cuts off the power supply to prevent circuit overheating during prolonged operation. Control method uses Reverse Polarity (black-negative, red-positive for valve open; black-positive, red-negative for valve closed), with simple wiring
Product Information
OP01 Wiring - 2 Wires, Reverse Polarity
1.Connects red wire to positive pole, black wire to negative pole, the electric ball valve opens.
2.Reverse polarity, the electric ball valve closes.
※ Once in position, there will be no power consumption.
※ In case of power loss, valve will remain in its current state.
※ Voltage of power supply for option:5V DC/12V DC/9-35V DC
※ A DPDT switch is suggested for a simple set up.
※ Valve status feedback available for custom.
Need certification details for a specific standard? Contact us — we're happy to help.