1/2" DN15 UPVC,Motorized Ball Valve, 2 Wire Auto Return,AC110-230V
- Material: UPVC body — suitable for wastewater & chemical media
- Power behavior: 2 Wire Auto Return — closes automatically on power loss; manual override lever included
- Fit & speed: 1/2" · opens/closes in under 5 seconds
- Protection: IP67 rated — dust-tight and protected against water jets
Estimated Shipping Widget will be displayed here!
Product Introduction
Specifications
FH-S
1/2"
UPVC
2 Wire Auto Return
PTFE
3-5 Seconds
5W
2.5NM
1.0 Mpa
0-100℃/32-212℉
80K times
Standard
Normally Closed
-20-45℃/-4-113℉
IP67
2 Wire & Auto Return
Simple 2 Wire connection ensures easy installation.Energizes only during operation to prevent overheating, and automatically shuts off on power loss for protect and convenience. Ideal for extended-use irrigation filtration, swimming pools or industrial systems
Product Information
OP04 Wiring - 2 Wires,Auto Return / Fail Safe
1. Connects red wire to positive pole, black wire to negative pole, the ball valve opens (the ball valve is normally closed by default).
2. Disconnect either wire (the circuit is open), there is no power supply to the ball valve, the ball valve closes.
※ Once in position, there is a nominal power consumption to keep the capacitor charged.
※ In case of power loss, valve will return to its normal position, which by default is normally closed valve. If normally open ball valve is needed, please let us know when place an order.
※ Voltage of power supply for option:5V DC/9-24V ADC/220V
※ A on/off switch can be installed in line with red wire for a simple set up.
※ Valve status feedback available for custom.
Need certification details for a specific standard? Contact us — we're happy to help.