1/2" DN15 ,stianless steel,Motorized Ball Valve, 3 wire 1 point control ,with position indicator and manual override,DC5V,DC9-35V, AC220V
- Material: 304 Stainless Steel body — suitable for food-grade & potable water applications
- Power behavior: 3 Wire 1 Point Control — closes automatically on power loss; manual override lever included
- Fit & speed: 1/2" · opens/closes in under 5 seconds
- Protection: IP67 rated — dust-tight and protected against water jets
Estimated Shipping Widget will be displayed here!
Product Introduction
3 Wire 1 Point - Simplified wiring achieved through a three-wire, two-point configuration (black wire to common terminal, black wire to red + green wires for open, black wire to red wire for closed). Manual override functionality can be added to enable seamless switching between manual and electric modes without tools. In emergencies, a single-button switch ensures continuous operation
Durable & Long-Lasting–Built from SS304 steel, NSF Certified,is safe for drinking water, movafaFH motorized ball valve withstands 80,000 - 100,000+ cycles, perfect for automated water control systems
No Leak & Wide Applications - Adopt silicone rubber gasket and float ball valve that superior sealing performance and good resistance to water, weak acids, weak alkalis, and alcohol. Ideal for HVAC,Medical Equipment,Farm Irrigation,Water Treatment,Energy Storage Equipment
NPT Threading & Full Port–Features 1/2" stainless steel full port and NPT threading for fit connections, effectively reduces pressure loss, ensuring optimal flow dynamics and efficiency
Specifications
FH-MO
1/2"
304 Stainless Steel
3 Wire 1 Point Control
PTFE
3-5 Seconds
5W
2.5NM
1.0 Mpa
0-100℃/32-212℉
80K times
Standard
Normally Closed
-20-45℃/-4-113℉
IP67
3 Wire (1 Point Control)
3 Wire 1 Point - Simplified wiring achieved through a three-wire, two-point configuration (black wire to common terminal, black wire to red + green wires for open, black wire to red wire for closed). Manual override functionality can be added to enable seamless switching between manual and electric modes without tools. In emergencies, a single-button switch ensures continuous operation
Wiring Guide
OP03 Wiring - 3 Wires, 1 Point Control
1. Connects red wire and green wire to positive pole, black wire to negative pole, the ball valve opens.
2. Disconnects green wire, the ball valve closes.
※ In case of power loss, valve will remain in its current state.
※ Voltage of power supply for option:5V DC/9-24V ADC
※ A on/off switch can be installed in line with green wire for a simple set up.
This OP03 electric ball actuator uses a constant power and ground wire while a third green wire is used for the control switch to open and close the valve.
※ Valve status feedback available for custom.
Need certification details for a specific standard? Contact us — we're happy to help.