automatic water shut off valve
5V 12 volt 24V electric motorized ball valve
movafafh ball valve 12v
movafafh electric valve for water
2 motorized ball valve
movafafh 2 way motorized ball valves

1-1/4“ DN32 Stainless Steel ,Motorized Ball Valve, 2 Wire Reverse Polarity Setup,with position indicator and manual override，15NM,DC5V,DC9-24V

$55.26
  • Material: 304 Stainless Steel body — suitable for food-grade & potable water applications
  • Power behavior: 2 Wire Reverse Polarity — closes automatically on power loss; manual override lever included
  • Fit & speed: 1-1/4" · opens/closes in under 5 seconds
  • Protection: IP67 rated — dust-tight and protected against water jets

Voltage: 5V DC

5V DC
9-24V DC

Thread Type: NPT

NPT
BSPP

Estimated Shipping Widget will be displayed here!

american expressapple paydiners clubdiscovergoogle payjcbmaestromasterpaypalvisa
WEEKLY BULK DEALS
Ends In: 0d 00h 00m 00s
BUY 4+ SAVE 3%
BUY 8+ SAVE 5%
BUY 18+ SAVE 8%
30-Day Hassle-Free Returns
1-Year Replacement Warranty
Expert Technical Support
Free shipping within the US for products shipped from our US warehouse. For other shipping policies, please click here.
We offer returns or exchanges for any issues reported within 30 business days of receiving your item. For our detailed return policy, please click here.
• 30-Day Hassle-Free Returns: Full confidence in every purchase. We accept returns within 30 days.
• 1-Year Replacement Warranty: We stand behind our quality. If any hardware failure occurs under normal use within one year, we provide a direct replacement rather than a repair.
• Expert Technical Support: Our engineering team provides lifetime technical guidance. Whether it's installation or troubleshooting, we are here to support your success.
If you have any questions, please contact us.

Product Introduction

2 Wire Reverse Polarity - When the ball valve is fully open or closed, the actuator automatically cuts off the power supply to prevent circuit overheating during prolonged operation. Control method uses Reverse Polarity (black-negative, red-positive for valve open; black-positive, red-negative for valve closed), with simple wiring
Durable & Long-Lasting–Built from SS304 steel, NSF Certified,is safe for drinking water, movafaFH motorized ball valve withstands 80,000 - 100,000+ cycles, perfect for automated water control systems
No Leak & Wide Applications - Adopt silicone rubber gasket and float ball valve that superior sealing performance and good resistance to water, weak acids, weak alkalis, and alcohol. Ideal for HVAC,Medical Equipment,Farm Irrigation,Water Treatment,Energy Storage Equipment
NPT Threading & Full Port–Features 1-1/4" stainless steel full port and NPT threading for fit connections, effectively reduces pressure loss, ensuring optimal flow dynamics and efficiency

Specifications

Model

FH-B

Size

1-1/4"

Valve Material

304 Stainless Steel

Wiring Type

2 Wire Reverse Polarity

Ball Seal

PTFE

Operating Time

15 Seconds

Max Power

22W

Max Torque

15NM

Max Medium Pressure

1.6 Mpa

Temp Range (Flow Medium)

0-100℃/32-212℉

Life Expectancy

80K times

Bore Type

Standard

Operating State

Normally Closed

Ambient Temp Range

-20-45℃/-4-113℉

Enclosure Rating

IP67

2 Wire Reverse Polarity

2 Wire Reverse Polarity - When the ball valve is fully open or closed, the actuator automatically cuts off the power supply to prevent circuit overheating during prolonged operation. Control method uses Reverse Polarity (black-negative, red-positive for valve open; black-positive, red-negative for valve closed), with simple wiring

Wiring Guide

OP01 Wiring - 2 Wires, Reverse Polarity

1.Connects red wire to positive pole, black wire to negative pole, the electric ball valve opens. 

2.Reverse polarity, the electric ball valve closes. 


※ Once in position, there will be no power consumption. 

※ In case of power loss, valve will remain in its current state. 

※ Voltage of power supply for option：5V DC/12V DC/9-35V DC 

※ A DPDT switch is suggested for a simple set up.

※ Valve status feedback available for custom.

Motorized Valve Override

Manual Override Function

Can be used when power off or emergency shutoff

Pull up the hand-wheel
Pull up the hand-wheel to
activate the manual function
Rotate the hand-wheel
Rotate the hand-wheel and
confirm the valve opening/closing
position of through the indicator
Press the hand-wheel to
switch back to electric mode

Need certification details for a specific standard? Contact us — we're happy to help.

FAQ:

1. What is the Waterproof Rating of this valve? +
The motor's housing is rated at IP67 for ingress protection. If permanently installed outdoors, it is recommended to place it under a shelter or in a protective box to prevent prolonged exposure to rain.
2. What is the difference between N.C. (Normally Closed) and N.O. (Normally Open) ? +
In a N.C. valve, it's closed without power and opens when energized. Conversely, in a N.O. valve, it's open without power and closes when energized, blocking fluid or gas flow.
3.What is the difference between Full Port and Standard Port? +
In a full port valve, the internal diameter of the valve is the same as the pipe it's connected to. In a standard port valve, the internal diameter of the valve is smaller than the pipe size.
4.Can this be used for Drinking Water? +
Only the stainless steel valve body is suitable for drinking water. Brass (contains lead) and UPVC valve bodies should not be used for drinking water.
5.For auto return valves, what is the minimum On-Time required for electrical storage to enable closing when power off? +
To ensure automatic reset functionality when the power is disconnected, it is essential to power the device for approximately one minute to charge the capacitor in 2-wire auto return motorized ball valves.