motorized actuator valve
electric ball valve with 3 wires,2 wire control
electric valve for water
electric valve 12v

1-1/4" DN32 Stainless Steel, Motorized Ball Valve, 3 Wire 2 Point Control,15NM,with position indicator and manual override,DC5V,DC9-24V, AC220V

$66.02
  • Material: 304 Stainless Steel body — suitable for food-grade & potable water applications
  • Power behavior: 3 Wire 2 Point Control — closes automatically on power loss; manual override lever included
  • Fit & speed: 1-1/4" · opens/closes in under 5 seconds
  • Protection: IP67 rated — dust-tight and protected against water jets

Voltage: 5V DC

5V DC
9-24V DC
220VAC

Thread Type: NPT

NPT
BSPP
Add to Wishlist

Estimated Shipping Widget will be displayed here!

american expressapple paydiners clubdiscovergoogle payjcbmaestromasterpaypalvisa
WEEKLY BULK DEALS
Ends In: 0d 00h 00m 00s
BUY 4+ SAVE 3%
BUY 8+ SAVE 5%
BUY 18+ SAVE 8%
Get Bulk Order Discount Ask on WhatsApp
30-Day Hassle-Free Returns
1-Year Replacement Warranty
Expert Technical Support
Free shipping within the US for products shipped from our US warehouse. For other shipping policies, please click here.
We offer returns or exchanges for any issues reported within 30 business days of receiving your item. For our detailed return policy, please click here.
• 30-Day Hassle-Free Returns: Full confidence in every purchase. We accept returns within 30 days.
• 1-Year Replacement Warranty: We stand behind our quality. If any hardware failure occurs under normal use within one year, we provide a direct replacement rather than a repair.
• Expert Technical Support: Our engineering team provides lifetime technical guidance. Whether it's installation or troubleshooting, we are here to support your success.
If you have any questions, please contact us.

Product Introduction

Specifications

Model

FH-B

Size

1-1/4"

Valve Material

304 Stainless Steel

Wiring Type

3 Wire 2 Point Control

Ball Seal

PTFE

Operating Time

15 Seconds

Max Power

22W

Max Torque

15NM

Max Medium Pressure

1.6 Mpa

Temp Range (Flow Medium)

0-100℃/32-212℉

Life Expectancy

80K times

Bore Type

Standard

Operating State

Normally Closed

Ambient Temp Range

-20-45℃/-4-113℉

Enclosure Rating

IP67

3 Wire (2 Point Control)

3 Wire 2 Point - Simplified wiring via three wires and two points (black wire to common terminal; black wire + red wire to open; black wire + green wire to close).Features overheat prevention, energy efficiency, overload protection, and reliable safety.

Product Information

OP02 Wiring - 3 Wires, 2 Points Control

1. Connects red wire to positive pole, black wire to negative pole, the ball valve opens.

2. Connects green wire to positive pole, black wire to negative pole, the ball valve closes.

※ In case of power loss, valve will remain in its current state.

※ Voltage of power supply for option：5V DC/12V DC/9-35V DC

※  A SPDT switch is suggested for a simple set up.

※ Valve status feedback available for custom.

Need certification details for a specific standard? Contact us — we're happy to help.

FAQ:

1. What is the Waterproof Rating of this valve? +
The motor's housing is rated at IP67 for ingress protection. If permanently installed outdoors, it is recommended to place it under a shelter or in a protective box to prevent prolonged exposure to rain.
2. What is the difference between N.C. (Normally Closed) and N.O. (Normally Open) ? +
In a N.C. valve, it's closed without power and opens when energized. Conversely, in a N.O. valve, it's open without power and closes when energized, blocking fluid or gas flow.
3.What is the difference between Full Port and Standard Port? +
In a full port valve, the internal diameter of the valve is the same as the pipe it's connected to. In a standard port valve, the internal diameter of the valve is smaller than the pipe size.
4.Can this be used for Drinking Water? +
Only the stainless steel valve body is suitable for drinking water. Brass (contains lead) and UPVC valve bodies should not be used for drinking water.
5.For auto return valves, what is the minimum On-Time required for electrical storage to enable closing when power off? +
To ensure automatic reset functionality when the power is disconnected, it is essential to power the device for approximately one minute to charge the capacitor in 2-wire auto return motorized ball valves.